The electrical configuration of CNC Swiss slitting lathes is a key part, which is directly related to the operating efficiency and processing accuracy of the machine tool. Below, I will give you a detailed talk about the electrical configuration of CNC machine!

 

‌ Power supply system ‌

The power system of the CNC Swiss slitting lathe requires stability and reliability, usually using a three-phase five-wire power supply system to ensure that the voltage fluctuation is within the allowable range. In order to cope with the unstable voltage of the power grid, three-phase AC voltage regulating equipment can also be configured to ensure the normal operation of the machine tool.

 

‌. The control system ‌

The control system of CNC machine walking is its brain, which is responsible for receiving instructions and controlling machine actions. The common control systems are FANUC, Siemens, FanUC, new generation system, etc., the system has the characteristics of high precision, high stability and easy operation. The control system is connected with each part of the machine tool by cable to realize the transmission of signals and the execution of instructions.

 

‌ Three, servo system ‌

The servo system is the power source of the CNC Swiss slitter, which drives each axis of the machine to move precisely according to the instructions of the control system. Servo system is usually composed of servo motor, servo amplifier, encoder and so on. Servo motor adopts high-performance permanent magnet synchronous motor or AC servo motor, which has the characteristics of high speed, large torque and fast response. The servo amplifier is responsible for amplifying the weak signal of the control system and driving the servo motor to operate. The encoder is used to detect the position and speed of each axis of the machine tool, and feedbacks to the control system to achieve closed-loop control.

 

‌. Electrical components ‌

The electrical components of the CNC Swiss slinting lathe include circuit breakers, contactors, relays, buttons, indicators, etc., which are responsible for the electrical control and protection of the machine. These components require reliable quality and stable performance to ensure the operation of the machine

‌. Cable and wiring ‌

The cables and wiring requirements of CNC Swiss slitting lathes are neat and standardized to avoid mutual interference and damage. Cables are usually shielded cables or twisted pairs to reduce electromagnetic interference. When wiring, factors such as the transmission distance of the signal and anti-interference ability should be considered to ensure the accurate transmission of the signal.

 

‌. Other configurations ‌

In addition to the above mentioned configurations, CNC Swiss slitters may also be equipped with a number of other electrical configurations, such as PLC (programmable logic controller), touch screen, temperature sensor, etc. The PLC is used to realize the automatic control of the machine tool, the touch screen provides an intuitive operating interface, and the temperature sensor is used to monitor the temperature change of the machine tool to ensure that the machine tool runs at the appropriate temperature.

In summary, the electrical configuration of the CNC Swiss scuttering lathe is a complex and fine system, which requires each part to cooperate with each other and coordinate work to ensure the high-precision and efficient operation of the machine tool. If you have any questions about a specific section or want more details, feel free to ask me!